The Chrysler Minivan Fan Club Forums banner

abs

  1. ABS Hydraulic Control Module or Modulator

    5th. Generation Chrysler Minivans: 2008-2019
    The brake pedal on my wife's 2011 town and country intermittently goes to the floor when braking!!! This problem became more frequent after a local shop replaced the left rear caliper. I replaced the master cylinder and used a pressurized bleeder to bleed the system and thought I had it fixed...
  2. Brake failure after ABS engaged

    5th. Generation Chrysler Minivans: 2008-2019
    I have a 2008 T&C with 125k miles. Normal braking works correctly, but lately when my ABS engages I loose all brake pressure. The pedal goes all the way to the floor with minimal amount of braking happening. The brakes don't recover after the ABS event, they remain soft. Haven't been able to...
  3. ABS is firing on 1 wheel for no reason

    4th. Generation Chrysler Minivans: 2001-2007
    So this started today, picked the kid up from day care and notice my RPMs seemed off for my speed. If I let off the gas, dramatic slow down. I nursed it home and found the driver's front wheel smoking. I replaced the caliper and put it back together. I lifted it up on stands and put it in drive...
  4. 2007 T&C - ABS light coming on intermittently.

    4th. Generation Chrysler Minivans: 2001-2007
    Hello, My ABS light has been coming on intermittently the last 3 week. After a stop, or after driving for a while it goes off. The humidity has been VERY high during this time, as in 100% all night and not getting below 90% during the day. I am wondering if the humidity is causing the problem...
  5. Got code: 9 - $28 hydraulic pump circuit malfunction

    4th. Generation Chrysler Minivans: 2001-2007
    Hi, I replaced last week catalytic converter and rack and pinion to our 2004 Town & Country, Limited. Catalytic converter was causing check engine light (code 0420) at least according the analyses by repair shop. Next day after the repair I got code 9 - $28 hydraulic pump circuit malfunction...
  6. Brake issues

    Introduce Yourself and Your Minivan
    I have an 03 t&c limited w/ 140k I went to start van after work and started to start made a noise and did not start. I restarted all seemed fine. I was driving down the road and pressed brake pedal and I had to use a lot of force to stop. When I got to my destination put in park I noticed the...
  7. New Brake Line Bleeding with ABS

    3rd Generation Chrysler Minivans: 1996-2000
    I had brake lines replaced on a 2000 GV with ABS at a local garage (from in front just before the braided section, to back over the gas tank). The finished job came back with slightly soft pedal action, but good enough for driving around - with the exception of when the ABS was activated...
  8. ABS light - broken wire under fuse box

    4th. Generation Chrysler Minivans: 2001-2007
    The ABS light is on and the code indicates a hydraulic pump circuit issue. I checked under the fuse box and noticed a broken wire. I don't know if that is the culprit or if I broke that wire when I lifted up the fuse box. There is corrosion in the connector. Anyone know what colour wire would...
  9. Proportioning valve? Scan tool to bleed after doing one?

    4th. Generation Chrysler Minivans: 2001-2007
    Well, i seem to have a proportioning valve going out on my 03 GC 2wd Sport. Seems the fronts are doing all the work, and then i can push just a bit more on the brakes, and it kinda pops into another zone, and the brake lite comes on. Rear drums are at or near the replacement measurement, with...
  10. Problem with check engine, abs, trac off, brake and gauges

    4th. Generation Chrysler Minivans: 2001-2007
    Hi All, my first post here. I am from Poland and hope to get some help here. I have Chrysler Grand Voyager 2.8 CRD (european). For some days I have problems with control lights on my panel. First I had check engine and air bag. On and off. No rules. They just go on and off during...
  11. ABS diagnosis questions

    3rd Generation Chrysler Minivans: 1996-2000
    I have a 2000 GC, the driver of which complains that the brake pedal is squishy and later the brake pedal is hard. Additionally, during normal braking, on dry pavement, the ABS unit fires up. The vehicle has a new master cylinder, and I replaced front pads and rotors 2 months ago, prior to...
  12. ABS diagnosis questions

    3rd Generation Chrysler Minivans: 1996-2000
    I have a 2000 GC, the driver of which complains that the brake pedal is squishy and later the brake pedal is hard. Additionally, during normal braking, on dry pavement, the ABS unit fires up. The vehicle has a new master cylinder, and I replaced front pads and rotors 2 months ago, prior to...
  13. ABS diagnosis questions

    3rd Generation Chrysler Minivans: 1996-2000
    I have a 2000 GC, the driver of which complains that the brake pedal is squishy and later the brake pedal is hard. Additionally, during normal braking, on dry pavement, the ABS unit fires up. The vehicle has a new master cylinder, and I replaced front pads and rotors 2 months ago, prior to...
  14. Disabling the ABS

    4th. Generation Chrysler Minivans: 2001-2007
    I am having an ABS issue where I can feel the system working when I am on dry pavement as if it is sensing a slip. After about 5-10 mins of driving the ABS light will come on and the system stops trying to work. It drives fine after the light comes on, I assume because the ABS system has given...
Top