The Chrysler Minivan Fan Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. 4th Generation Chrysler Minivans: 2001-2007
    Was checking on some wiring and found this connector dangling towards the PCM area. Does anyone know what this connector is for or where it goes? Asking so I don't have to remove my battery and IPM module for nothing 😂 Side note I've been having some electrical problems. Misfiring at idle...
  2. 5th Generation Chrysler Minivans: 2008-2020
    I have a 2015 T&C that has an inop passenger sliding door lock. I can't luck or unlock it either manually or with power. I'm suspecting something mechanical but I want to cover all bases so I'd like to make sure that an electrical signal is getting to the lock actuator. Does anyone know what...
  3. HeadRestConnector.png

    The connector from the active headrest located in the back panel of the driver seat.
  4. 4th Generation Chrysler Minivans: 2001-2007
    Found an unplugged connector under the hood. *Connector 52772 A1
  5. 5th Generation Chrysler Minivans: 2008-2020
    I have a 2013 Town and Country Touring that I bought a few months ago. I'm starting to have some issues which I think could be related to the ECM and our it's connectors. One issue is I have an intermittent error on the camshaft sensor B Bank 2. I replaced the sensor but the problem came back...
  6. 4th Generation Chrysler Minivans: 2001-2007
    I have a 2005 Dodge Grand Caravan 217,000+ miles. Has anyone ever had problems with the fuel injectors electrical plug located under or near the spark plug High voltage coil by the power steering reservoir when it rains hard while driving? I'm suspecting this plug. Seems the van has some...
  7. 3rd Generation Chrysler Minivans: 1996-2000
    Hi im a new user un this forum, well i found a connector under the facia, i removed the facia because i crashed and when remove that round the connector. The connector located under front bumber and middle of this. The van is a caravan sport 3.3l 4 spd
  8. 3rd Generation Chrysler Minivans: 1996-2000
    Searched the forum but didn't see any info on replacing the injector connectors. Am I the only one that seems to have them crumble or break trying to remove them? Anyway, brittle little buggers, break easily. I need to replace a few of them. Hoping I don't have to cut and splice to replace...
1-8 of 8 Results