The Chrysler Minivan Fan Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 28 Results
  1. 5th Generation Chrysler Minivans: 2008-2020
    I have a 2013 Chrysler Town and Country and I replaced the engine. After installing the new engine, there is a scraping sound when I turn the engine with a cheater bar. The starter can not turn the engine (this is a new starter). My torque converter has been properly connected to the flex plate...
  2. 2nd Generation Chrysler Minivans: 1991-1995
    We all know the 3rd generation vans had either the Mitsubishi 3.0, or Chrysler 3.3/3.8 in the extended vans. I was casually doing some research today and noticed that I've never seen a 2nd generation extended van with the 3.0. Always the 3.3. This got me very curious. Did the 2nd generation...
  3. 5th Generation Chrysler Minivans: 2008-2020
    So I have a confusing situation that I need help with. On my 2013 Chrysler Town & Country Limited (175,000 miles) that I bought as a fixer upper, I replaced the back side (or right side) intake and exhaust camshafts along with all of the rocker arms. The engine was running rough, and once...
  4. 4th Generation Chrysler Minivans: 2001-2007
    Hey guys, Last night I was removing my power steering reservoir to deep clean it (can’t afford replacement right now) and I didn’t realize I was putting weight on the world’s tiniest tube and broke it. No fluid came out, I’m sure it’s an air-related thing, which is good. But I have no idea...
  5. 4th Generation Chrysler Minivans: 2001-2007
    I have a 2005 grand caravan sxt special edition 3.8L, it has almost 120k miles. Here is the list of work I did on it in the last year: New Starter New Radiator New water pump New serpentine belt New brakes pads and disks New front axles New rack and pinion New AC compressor All 4...
  6. 3rd Generation Chrysler Minivans: 1996-2000
    Okay, admittedly I might be in over my head on this one, but I’m stubborn and refuse to believe I can’t learn how to do something given time and some guidance(the latter of which brought me here) My 2000 TaC 3.3L V6 had coolant and oil mixed in both the oil pan and the radiator, which lead me to...
  7. 4th Generation Chrysler Minivans: 2001-2007
    Hey there, I have posted this into the 3.8l Engine forum but have been recommended to look for help here in 4th gen. So I hope I am not getting in trouble for copy pasting the text :) I will try to be as specific as possible, but there is lots of funny stuff going on with my Town and Country...
  8. 4th Generation Chrysler Minivans: 2001-2007
    Ok so I am brand new here and am wondering about advice on an engine swap for a 2005 Chrysler Town & Country Limited 3.8L. Last year the engine started knocking and it's been sitting in my parent's garage ever since. It still ran and drove, but the knocking got so bad, the engine would've likely...
  9. 4th Generation Chrysler Minivans: 2001-2007
    Hi! This is my 2005 Chrysler Voyager 3.3L, driven 131,000 Km (~81000 miles). I have owned this car for a couple of months and I am a bit concerned about the engine sound. To me it sounds rather ticking, tapping or rattling. The audio isn't perfect, but I would like to hear your opinions on how...
  10. 3.0L V6 Tech Talk
    i know this is a crazy idea but since i've seen a stock Ford Transit ice cream truck in one year's Gumball 3000 i thought about building a 87-90 ChryCo minivan when i make it in life, with a built 3000gt twin turbo 3.0 and a built 5 speed manual that's compatible with that motor (is the Getrag...
  11. For Sale
    Hey Fellas, I have a motor for a 5th gen, the 3.6L, pulled from a 2012 Journey, mileage unknown. From my research I believe it'll work fine for 2011, 2012, and 2013 minivans too. If you're reading this, you probably know more about the compatibility than I do. It's Model 300-08007C, VIN G...
  12. 4th Generation Chrysler Minivans: 2001-2007
    Took my 2006 Town & Country (3.8L, 163,000 miles) to dealer to diagnose a rough idle condition after I ruled out all the usual suspects. They found low compression on cylinder 2, so I had them pull the head thinking the valves might be pitted or burned. They reported the valves are fine, but the...
  13. 4th Generation Chrysler Minivans: 2001-2007
    Ready to lift the motor out of my 2006, but can't see any convenient locations for bolting the lifting chains to the motor. Anyone done this and know of good locations for the hoist chain bolts? The only ones I see that are in a good location are on the cylinder head. Hate to use those for...
  14. 3rd Generation Chrysler Minivans: 1996-2000
    Hi all I'm trying to help out my grandfather fox his can it's a 97 dodge caravan 3.0, 4 cylinder. It refuses to idle you can start it but to keep it running you have to give it some gas, what are your thoughts on what it can be I have checked spark plugs, the air filter, I have checked injectors...
  15. 4th Generation Chrysler Minivans: 2001-2007
    Hi - I'm looking for some ideas on what would be the best way to proceed with my van. It is a 2005 Town and Country, 3.8L engine, 191,000 miles. I took my van in for service because a few days ago it began "chugging" and what sounded like misfiring. The codes I got read p0300, p0306, and p0032...
  16. 4th Generation Chrysler Minivans: 2001-2007
    RPM dependant. top end. https://www.youtube.com/watch?v=Sp1NJgHLEDg video I did with it. engine has on around 100K on it.. any idears?
  17. 4th Generation Chrysler Minivans: 2001-2007
    1 have 175K and I engaged the passing gear one too many times it seems. Does anyone know what this may be and if it can be repaired? I don't have high hopes for the engine but I absolutely LOVE this AWD van and want to keep it running as long as possible. I can't afford $5K for a rebuilt...
  18. 4th Generation Chrysler Minivans: 2001-2007
    This is my first post so please let me know if I need to post in another area or any housekeeping I need to do. We have the 2006 T&C 3.8L van - it has 130,000 on it. In the last month I have noticed a noise coming from the engine compartment. The noise does not speed up when you rev the engine...
  19. 3rd Generation Chrysler Minivans: 1996-2000
    I put in a salvage engine this weekend... first time for doing something like this. It all went smooth, now I am replacing gaskets, tune-up items... Can someone tell me what this line is, and what is the gasket? I can not find any reference to it and don't know what kind of gasket I need to buy...
  20. 4th Generation Chrysler Minivans: 2001-2007
    So while changing brake pads on a 04 Grand Caravan I decided to bleed the brakes I started with the LH drivers side wheel and as soon as I cranked the engine it was hard to start, it then began to shake as if a motor mount was loose, the exhaust would come out of the tailpipe in pulses instead...
1-20 of 28 Results
Top