Folks: I've blown the head gasket(s?) in my 2001 Town & Country 3.8L v6. Might anyone have a step-by-step guide for replacing it/them? I'm reasonably adept with a wrench, but haven't tackled a job like this before, so any guidance I can find would be much appreciated. DugIn
I have a 2002 Dodge grand caravan, 3.3 engine. 137,000 miles. The problem started 2 years ago when top radiator hose blew off going down highway. Filled coolant system back up and put a screw type clamp on hose. From time to time the hose would be very tight and system still was pressured even...
Driving my 2003 T&C with the 3.8L, suddenly the car lost power and began bellowing white smoke, not steam, smoke. Was able to limp it the mile home without overheating but barley got it to 20mph. I let it sit a couple of days while out of town, started it when I returned and the white smoke...
So after replacing about a month ago both front Cam seals, the Crank seal, the Timing belt, etc... And then replacing the fuel pump after it went bad 4 days ago, we drove it about 750 miles away to my in-law's in Michigan.
It started doing a three second overheat, where it would start to heat...
hi can anyone tell me if I can just remove the exhaust manifold bolts at the heads and lower the exhaust on a 2002 caravan leaving the manifolds and crossover attached to the cat so I can remove the heads.
:cool: Took off the heads due to this:
Wondering if there's anything else y'all recommend while I've got everything off and out of the way?
How solid are the lifters? Will they last another 100k?
3.3l Flex Fuel
I need to replace my head gasket........so I am just going to get the Felpro/Head Gasket Set (HS9978PT) and replace them all while I am in there since I have it all apart.
Couple of questions:
1. What manual do you all suggest as a reference (seems to...