The Chrysler Minivan Fan Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Vehicle Electrical Components
    So I picked up a 2013 town and country and not surprisingly it has a few little quirks and electrical issues. But since they're kind of big issues to me. I'm on a budget and trying to figure out what's going on myself but have so far been pretty unsuccessful in my efforts. What's going on...
  2. 4th Generation Chrysler Minivans: 2001-2007
    Hello I think i've read most of the site LOL . Its an addiction. I've got a 2004 T&C Touring model. about 146,000 miles. I have been using chrome tape on the chrome strips that are on both sides of the van to cover up the worn out part.Looks good for about 6 months and then need to do it...
  3. 5th Generation Chrysler Minivans: 2008-2020
    I have a 14 T&C minivan. It has 50k miles on it and the power locks just started not working. The child proof button is not activated. Also, the locks will not operate from the key fob. However, the key fob will open the doors and liftgate still. I did notice a small red dot blinking on the dash...
  4. Introduce Yourself and Your Minivan
    New to this site and love my caravan! Have a rusted out 2000 Grand Caravan with a freshly dead transmission and a leaking rear main seal that has served well for 300K miles. Pulling any luxury systems and block and tranny before having it crushed. The body is that bad. Recently purchased a...
  5. 3rd Generation Chrysler Minivans: 1996-2000
    For the twelve years that I've had my 1996 LE, there have been glitches in the electronics. At widely interspersed times, the rear window wiper will turn itself on, or the radiator cooling fans when the ignition is off. Twice the instrument panel went dark, fixed by switching off the ignition...
  6. Exterior Body & Lighting Accessories & Care
    http://www.lxforums.com/board/showthread.php/302522-Now-fabricating-LED-lit-plexiglass-door-lock-pulls basically, this could be done with just some curtain rods and a drill. But on 3rd gen models, they look like this: And the trim looks like this: 4th gen: On the 3rd gen it is pretty...
  7. 2nd Generation Chrysler Minivans: 1991-1995
    Just wanted to see if anyone else has experienced difficulties with the manual locks on older vans. I've seen a lot of threads on here about the electric locks going bad but I don't have power locks. It has gotten to the point where it's a real pain to get it to unlock with the key from the...
  8. 4th Generation Chrysler Minivans: 2001-2007
    I know about the problem with the door locks completely failing, and using the IOD trick, or possibly reprogramming the BCM, but I don't think this is related. I can use the switch to unlock the doors and I hear the actuators working, but neither of the switches will lock the doors. I thought it...
  9. 3rd Generation Chrysler Minivans: 1996-2000
    Yesterday I found that you can sometimes clear mysterious electrical malfunctions by simply disconnecting the battery for several minutes. Yesterday I couldn't disarm my alarm for NADA and at the same time, the door locks were malfunctioning. Note that I had not had ANY previous problems at...
  10. 3rd Generation Chrysler Minivans: 1996-2000
    Greetings all. New to the forum, hoping someone has had this problem before. 1999 T&C Lxi w/3.8L At apparently random times, while driving the van, we will hit a bump and the door locks will click down, the dome light will flash and the door chime will sound. It may be related to moisture as...
  11. 3rd Generation Chrysler Minivans: 1996-2000
    Hello! I've got the European version of the Chrysler minivan, a -98 Chrysler Grand Voyager LE, and it has started acting up on me. What started it all was that the central locking stopped working after the car had been parked for a few hours. I always try the key fob first, and then move on to...
  12. Audio/Video/Electronics
    Hey everyone, I'm having troubles with the power door lock on my 2005 Dodge Grand Caravan SE not working. I reset the computer and it makes the problem go away for a short while but it always comes back. Apparently it's a BCM issue but I guess I can't just throw in a used one of those. Any...
1-12 of 12 Results
Top