The Chrysler Minivan Fan Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. 5th Generation Chrysler Minivans: 2008-2020
    I have a 2009 TC Touring with the 3.8L and the entire bottom end needs gaskets. It just turned 107K miles and has started leaking fluids from everywhere. This weekend I plan on replacing the oil pan and transmission gaskets but found 2 issues. 1. The oil pan appears to be 2 pieces, the pan...
  2. 3rd Generation Chrysler Minivans: 1996-2000
    Should I use a gasket sealer when replacing the oil pan gasket? If so, does the sealer go on both surfaces of the gasket? Same for the valve cover gasket? Best type of gaskets, carboard, cork, or other? Anything else I should know, not having done this before? Thanks!
  3. 4th Generation Chrysler Minivans: 2001-2007
    Well not really because the gasket was bad but because somewhere along the line the oil pan got dented in a little. Not sure how? Maybe something hit it or someone used it as a jacking point? Sorry no pics this time. Anyway, I’m quite certain the pan has never been off before and overall I was...
  4. 4th Generation Chrysler Minivans: 2001-2007
    I'm about to replace the gaskets for my transmission and oil pan and was wondering if most of you all use a torque wrench or just tighten them up until they feel right. Any suggestions about types of gaskets would be much appreciated too. I've read that the felpro ones were good. I've had...
1-4 of 4 Results
Top