Search Results for ‘p0740’

I recently had these 2 codes pop up on my van with 165k miles. It hasn't been the smoothest shifting so I figured something would give eventually. I replaced the torque converter, the pump assembly, bypass valve, VFS Solenoid, stator bearing, cooler lines, all fluid, flushed the cooler, the...

I have a 2011 Chrysler Town and Country Touring L (62TE transmission). I purchased this vehicle almost two years ago from a dealer with 115k miles. When I test drove it, everything was fine, but about halfway on the 100 mile drive home the Check Engine Light (CEL) came on (now I know I should...

2013 Town & Country 130k miles recently purchased and check engine light came on after driving off the car lot! We had torque converter replaced due to P0740 error. Now when shifting from 4th to 5th & 5th to 6th it jumps up a few 100 RPM before shifting. Transmission shop said they couldn't...

My 2004 3.8L T&C transmission gave up last Saturday after 182000 miles on it. I can't complain it for poor quality! During last 12 months I have got numerous times P0700, P0740 and P0306 codes. My estimation is that we got around 12000 miles after the first transmission related code. I have...

I solved P0740 fault by changing torque converter clutch disc. 1. first you should check transmission TCC off pressure port there should be hydraulic pressure between 0 and 5 PSI. When the actuat gear at 4th and TCC applied 2. If you see pressure 0-5 PSI your transmissions valve body is okey 3...

I was hoping for some confirmation on my trans issue. Read up on it but didn't see my symptoms mentioned. Got the 2001 T&C 3.8L Lxi with 63,000 on it a few months ago. It's history is that it has been sitting a lot over the last 20,000 miles of the last owner as it was used for a handicap person...