The Chrysler Minivan Fan Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. 5th Generation Chrysler Minivans: 2008-2020
    Last fall while disengaging the parking brake my foot slipped off the pedal and it popped up really hard, now it doesn't work. It goes down and locks and releases when the pedal is pushed down again but nothing moves to pull the slack out of the cable. I can hear the ratchet system clicking. All...
  2. 4th Generation Chrysler Minivans: 2001-2007
    Recently (like, yesterday) discovered that the previous owner of my T&C removed the passenger side parking brake and associated hardware. All that was left was the cable and the lever. Lever got caught in the wheel assembly somewhere and got smashed (and put a couple gouges in my rotor and the...
  3. 4th Generation Chrysler Minivans: 2001-2007
    Hi all, Apparently I applied my parking brake with too much force. :nut: I heard a loud "clunk" and felt the pedal go to the floor. I released the lever and found that the parking brake only slightly functions now. I inspected as I could from inside the driver's compartment and cannot see...
  4. 5th Generation Chrysler Minivans: 2008-2020
    I have noticed that when I use my parking brake on my 2011 Town and Country that the pedal will release, yet the brake on the rear driver's side will some times stay partially engaged. I'm wondering if anyone else has had this problem, and if so could point me towards possible solutions. An...
  5. 3rd Generation Chrysler Minivans: 1996-2000
    The 3 bolts holding the assembly to the wall are just about impossible to reach with standard tools. What new tools do I need? The bolt heads are 10mm. Thank you.
1-5 of 5 Results