The Chrysler Minivan Fan Club Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. 4th Generation Chrysler Minivans: 2001-2007
    HI All, New here. My girl has a 2001 Grand Caravan with just over 100k miles on it. it was doing the typical blown resistor things like only working in the high position. It would also just stop working sometime and then randomly start working but only on the maximum blower position. Checked...
  2. 4th Generation Chrysler Minivans: 2001-2007
    My rear blower motor works. I get cold a/c. The front blower doesn't work on any speeds. Perplexed: I just jumped a wire from the dark blue power wire in harness going to the power green line going to the fan. I then grounded the fan by jumping a wire from the black line going to the fan, to...
  3. 5th Generation Chrysler Minivans: 2008-2020
    Hello all, I have installed full LED lights all over my van, inside and out. The problem I am having is hyperflash. I already have a set of four load resistors to fix them, but the wiring is the problem. There are 3 wires; One black, one white with a green stripe, and one white with a red...
  4. 4th Generation Chrysler Minivans: 2001-2007
    I've done my searching and it looks most likely to be the Blower Motor Resistor (AKA Blower Motor Control Module). Before I drop $70 (the part for vans with climate control are more expensive than manual control) on this part I'd like to have a schmatic to check power going into the Blower...
  5. 4th Generation Chrysler Minivans: 2001-2007
    Hi, all. 2002 T&C LXi I just replaced the "resistor" (part #973-027, $51 total) because my blower was stuck on high all the time. The new one went bad after 4 days. Does this automatically point to the blower motor as drawing too many amps? Or could I have gotten a bad resistor? I don't...
  6. 5th Generation Chrysler Minivans: 2008-2020
    I've been having some issues with my front blower not working, the rear hasn't been working for about 2 months now. I ordered the blower motor resistor from the local auto part store and they gave me an 8-blade resistor but what I believe to be the front resistor appears to be a 4-blade in our...
1-6 of 6 Results
Top