The Chrysler Minivan Fan Club Forums banner

starting

  1. Dull metallic snap noise upon starting -- power brake booster?

    Suspension, Brakes, Steering, Tires & Wheels
    1996 Grand Voyager SE with 187k miles. Runs well. Just a week or two ago, it started making a noise upon starting, seeming to come from the brake pedal. The noise happens whenever the engine is turned on, and never happens at any other time. It's a dull metallic snap that reminds me of a...
  2. 1996 T&C Van - Stall immediately after start

    3rd Generation Chrysler Minivans: 1996-2000
    Recently purchased used 1996 T&C LXi 3.8L van with 250k+ miles....have been very happy/lucky after having used it to drive 2,800 miles cross country to move; with one major exception: 1a) Stalls soon after starting...no error codes readable as dash is digital (analog guages for tach, etc. are...
  3. Starting issues

    3rd Generation Chrysler Minivans: 1996-2000
    I recently started having problems starting my T&C. Sometimes it will start fine. Sometimes it will click and start to turn over for about 1 second or less and thats it. First few times i pushed the shifter up a bit (it was already in Park) and then it started. Now it seems to be getting worse -...
  4. 2000 Grand caravan wont start turns over no spark

    3rd Generation Chrysler Minivans: 1996-2000
    2000 grand caravan 3.3 v 6 flex a604 transmission. Just replaced front transmission seal. After getting trans back in the motor turns over but there is no spark. Wondering what the most likely cause is? Thinking throttle position sensor..... Any directions on how to test different...
  5. 'EGR control' + Cranking 3X for startup ??

    2nd Generation Chrysler Minivans: 1991-1995
    ' 'Resolved' On my 1995 Ply G.V. I had check engine lite on --- code 32 EGR valve. I checked for voltage at EGR control valve terminals and it would get a voltage when engine RPM's were raised -. ---- BUT NO EGR valve action - plunger movement. I went to local U-Pull...
Top