The Chrysler Minivan Fan Club Forums banner

steering gear

  1. Inner Tie Rods

    4th. Generation Chrysler Minivans: 2001-2007
    I've done outer tie rod ends before, but I've never replaced an inner tie rod before. There's definitely too much play in my left inner tie rod for an alignment to hold, though. Have any of you done inner tie rods, and if so, is there anything I should know - tools or techniques - going in? Nate
  2. Steering Rack: Is it or isn't it bad?

    2nd Generation Chrysler Minivans: 1991-1995
    1995 Grand Caravan Sport Wagon, 3.3L 6cyl I have been having a vibration and wobble for a while now; recently got worse (which is good, that means I can diagnose it now!) Seems to be the steering pinion gear at the rack. There's a clunk right in there when I have a friend move the wheel back...
  3. rack and pinion install

    4th. Generation Chrysler Minivans: 2001-2007
    I am replacing the power steering rack in my 2002 town and country. I have the old rack out and the new rack in, including lines. I am stuck trying to get the universal joint to connect to the steering gear. I removed the roll pin with a punch during the removal of the old rack. I gained...
Top