[BC84]

I'm looking for some help here. I am continually getting a P076A code and the van going into Limp mode (maxing out at 3000 rpm and 40mph). Van has 190K on it and has had the following work recently done.
10/21 - Transmission filter, fluid, shift solenoid pack and fluid pressure sensor replaced
10/21 - EGR valve, spark plugs and spark plug wires replace
7/22 - transmission checked out, solenoid pack ohm out (1-1.5 ohms), replaced PCM (incorrect voltage on driver).
Still going into Limp mode. Wondering what else the problem could be.

 

[ggoose]

Please check out this link.

2010 T&C Limp Mode P076A

So on a recent road trip, my wife's 2010 Chrysler T&C with the 3.8 and of course the 62TE trans decided to go into limp mode; it threw code P076A, which shows its a malfuction with shift solenoid H, the DC one. Playing around with it, It goes back to normal operation on cold starts, but comes...

www.allpar.com