The Chrysler Minivan Fan Club Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I have a 2002 T&C... It has the Factory VTSS and Immobilizer(SKIM) with Sentry keys... The Immobilizer has been giving me problems like losing all the Key Transponders and locking out the VAN, So I disconnected the immobilizer and replaced the PCM with a flashed/Reprogrammed unit. The Vehicle starts/runs just fine but the Security Light remains illuminated. I am assumming that since the BCM knew of the SKIM module but the PCM never did that is why it is working but the BCM is doing a diagnostic and knew of the SKIM module and is now failing the Diag test. Is there any way to turn off the light via the BCM? I have a DRBIII but I am concerned with resetting the module and losing all the setting sand reprogramming for the RKE and so forth !!:blink:
 
1 - 1 of 1 Posts
Top