The Chrysler Minivan Fan Club Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey everyone, long time listener first time caller. Have an 08 town and country 3.3 liter crank no start. Seems all the wiring is ohming out as it should. Have power to the ignition control module and all signals out. Cam and crank are in sink with my solus pro. Only code i had gotten was p0118. All wires there ohm out. Has anyone ran into this before?
 
1 - 2 of 2 Posts
Top