The Chrysler Minivan Fan Club Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1
Now facing a slightly different problem. About 2 monthes ago I replaced wires and rear plugs to clear up the problem of where the other new plugs had basically disintegrated. Everything seemed fine afterwards, but now the 3.8l seems to be missing/running rough at anything below 1500 rpm. A p0301 was set but upon clearing the code no new are set and I can sit there and almost from the fitgo the engine begins to run like crap if slightly warm. It's not immediate from a cold engine

Sent from my SM-N950U using Tapatalk
 
1 - 1 of 1 Posts
Top