The Chrysler Minivan Fan Club Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hello. I've been reading a lot about many vehicles that contain the chrysler 3.6 engine having problems. In that research it appears that several grievances have been filed against Chrysler if consumers bought or leased a 2011-2014 3.6.
Does anyone know if Chrysler is resolving these issues. All the court documents say is that the cases were "settled."

My 2014 3.6 T and C is showing a 0302 code; cylinder 2 misfire. I have done the following:

Changed plugs
Changed coils
Cleaned fuel injectors
Replaced plenium gasket
Performed pressure check (60 psi) I know this is very low.

I think their is any engine issue. Anyone have any thoughts?
 

·
Registered
2014 Town & Country
Joined
·
348 Posts
I had that exact code … P0302. It ended up being a dropped rocker that started to chew into the back/right most cam.

i diagnosed it by using a stethoscope to hear a difference in how the drive train sounded on that cylinder compared to the others.
 
1 - 2 of 2 Posts
Top