The Chrysler Minivan Fan Club Forums banner

Battery Drain on my 2000 Town & Country

8720 Views 5 Replies 6 Participants Last post by  Earl D
I am measuring still have about .1 amp draw with everything off after several hours of shutting the ignition off. Tried pulling fuses and find the only one that reduces the draw is the EATX fuse. When I pull that the draw drops to about .04 amps or less. When I reinstall the fuse the relay snaps and the draw goes back to .1. I tried to pull the EATX relay but no change as long as the fuse is in. Also switched a couple of relays but no change. Any ideas what might be the solution?
1 - 1 of 6 Posts
How do I measure the Amps? My DVM only goes up to 1A or something like that and I know the battery itself far exceeds that, don't want to blow the meter up!

PS: Yes, I have the same problem. Don't know exact draws yet, but the battery drains to dead overnight.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.