[todesritter]

Ok, I have a 2010 Town and Country with power sliders, windows, and locks. About a month ago the right slider started buzzing loudly when we unlock it. Did a little Youtube research and looked like a painful but doable job. Got the part and got to working on it today. I followed all the steps in the videos I found, but I could not get the darn door module out so that I could get to the latch and replace the actuator. The rear window track was in the way and I could not move it despite taking the two screws out. The latch screws were also removed and I had the window taped up and open. I am at a loss here. I just put it all back together again because I didnt want to force it and break it. Totally frustrated. Does anyone have any tips or info on how to get r done? Thanks in advance.

 

[Murphy]

Similar problem on my 2008. Door will not open at all. It is locked shut. Cannot open it to get access to screws on rear side to remove the actuator housing. Also have the interior panel with the 12 10mm bolts loose, but cannot get it off. It is hung on the back, I am thinking the window track?