I was driving along at 70MPH when tack & speedometer quit, pu;lled over and shut off hoping computer would reset, when I restarted only the tack works. I did some searching and most suggest it would be the output speed sensor, checked the wire connectors on both input and output looked good so replaced the output sensor, still no good, pulled the fuse on the IOD for 15 minutes and replaced, that didn't help, pulled the connections off the computer by the battery and they were all good, tried to get codes but can only get "LINK" message from my reader. The transmission shifts normal if you don't get on the gas heavy but if you get after it, it doesn't want to shift until you let off it a little. Does the input sensor have anything to do with the speedometer, all I have read is it controls the trans shifting which apparently I need to replace anyway. Any other suggestions as to solving my problem would be great.
Thanks Bluenose
Thanks Bluenose
