What is a "lift door zone switch"?

1 - 1 of 1 Posts

ronman

Registered

Joined Aug 24, 2011

146 Posts

Discussion Starter • #1 • Apr 30, 2018

A scan of error codes on my 1996 Grand Caravan 3.8L shows "lift door zone switch defective". A google search and rockauto search for "lift door zone switch" turn up nothing. What/where is it?

Or maybe this refers to a software glitch in the BCM?

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Seat Toledo mpv 2005

Vehicle Electrical Components

I've just renewed water pump and temosat Flushed system But now no heat from blower but fans work Got a new resistor but where does it go got glove box and panels off Or is it a daft problem
- 5
- 117
- Hirdy · updated 3 months ago
"No bus" indication and everything goes crazy. Chrysler Grand Caravan 2008 3.8L

Vehicle Electrical Components

Many posts out there, but hard to get something "real" out of it, but maybe someone here can point out the main issue? It all started out of the blue, turned the ignition on and the dash was like the one in this video: Took the car to a dealer who connected a computer to the car and after an...
- 4
- 406
- N
  nocash · updated 4 months ago
free electrical diagrams

Vehicle Electrical Components

Except for 2014+ 5th gen models, this is a great resource for wiring diagrams (They have up to 2013 for the minivans) (also check your library :) ) http://www.bbbind.com/tech_database.html BBB Industries provides FREE access to our database of Technical Service Bulletins (TSB’s) and Wiring...
- 7
- 2K
- B
  blknblu · updated 4 months ago
Low voltage on code read

Vehicle Electrical Components

I recently had problems starting the van. It is a 2012 town and country with 196,000km on it. I thought it was the battery but when I tested it with my ohm meter it was 12.4volts. I had someone turn the key and no power was pulling from the battery. Then the van lost all power and key fob would...
- 0
- 189
- G
  gravitysdepth · updated 4 months ago
Where are grounds on '96

Vehicle Electrical Components

I want to clean the ground connections for the main vehicle ground, alternator ground, transmission ground, and any others I can find. The battery negative terminal wires go somewhere under the battery and I can't see any black wire-to-chassis connections under the hood without taking out...
- 0
- 147
- R
  ronman · updated 6 months ago