Thanks, I'll try that this afternoon and report back.

Best regards,

Brian
2013 GC Crew
2003 GC Sport

 

In case the link doesn't work for you:

Removal

1. With the third row seat folded into the floor well, use trim stick C-4755 or equivalent to disengage the clips (1) that secure the anchor molding (3) to the seat frame.

2. Remove the bolts (1) that secure the front of the seat to the floor panel.

3. Raise the seat to the upright position.

4. Remove the bolts (1) that secure the hinges at the rear of the seat to the floor panel in the sequence shown and remove the rear seat.

Note that it appears to be for the 2005-2007 minivans, but the 2008+ rear seats are very similar.

 

In case the link doesn't work for you:



Note that it appears to be for the 2005-2007 minivans, but the 2008+ rear seats are very similar.

Thanks, I'll try that this afternoon and report back.

Worked fine. You just unbolt the top ones first with the seat folded into the floor and then swing the seat up to access the lower bolts. Much thanks.

Brian
2013 GC Crew
2003 GC Sport

 

Understood.

EDIT:

I found this, which might be helpful for you: http://www.justanswer.com/dodge/4x4cv-dodge-grand-caravan-details-permenently-remove-rear.html

 

Well if there was an easy way I assume it would be included in the owner's manual and I wouldn't be asking here. We haul a full load great distances so removing the seat entirely will give us much more cargo space and reduce unnecessary weight.

Perhaps I should rephrase the question: does anyone know the proper sequence for removing the retaining bolts securing the seat to the floor and storage well?

Best regards,

Brian
2013 GC Crew
2003 GC Sport

 

It's not designed to come out...easily.

It's designed to just fold into the floor.